Base Coatings

Screen Layer

(Product ID: SCR-XXX) 

The epoxy-based screen layer (SCR) is a two part formulation designed to be applied to surfaces using conventional paint spraying equipment to mask machining marks and stains or to mask surfaces that fluoresce and interfere with PSP or TSP data.  FIB basecoat also provides a uniformly reflective surface to minimize illumination errors and enhance the emission of PSP and TSP.  SCR comes in two parts and is mixed 1:1.  SCR provides the highest quality surface screen layer without superior solvent resistance and improved opacity.  The solvent resistance means PSP can be applied over it and removed many times without the need to reapply the screen layer each time. SCR needs to be fully cured before the PSP is applied by curing at elevated temperatures (90C for 3 hours) or by allowing a few days to air cure to prevent the screen layer from interacting with the PSP and compromising data. SCR is a permanent screen layer.  Shelf life is 3-months.

screen layer

Screen layer in two parts, before mixing

Specifications

Shelf life: 3-months


Downloads

Screen Layer Painting Instructions.pdf

Screen Layer Part A SDS.pdf

Screen Layer Part B SDS.pdf


Available quantities: 200-ml, 400-ml, 750-ml

Surface coverage is approximately 1 square meter  per liter. 


FIB Basecoat

(Product ID: FB-XXX)

      FIB Basecoat is a single application screen layer that is sprayed onto a model surface with paint spraying equipment to mask machining marks and stains or to mask surfaces that fluoresce and interfere with PSP or TSP data.  FIB Basecoat also provides a uniformly reflective surface to minimize illumination errors and enhance the emission of PSP and TSP.  This formulation is recommended for surfaces where the screen layer and PSP or TSP absolutely must be removed from the surface using common mild solvents.

Specifications

Shelf life: 12-months


Downloads

FIB Basecoat Painting Instructions.pdf

FIB Basecoat SDS.pdf


Available quantities: 200-ml, 400-ml, 750-ml

Surface coverage is approximately 1 square meter  per liter. 

For ordering information, please contact our sales department: issi-sales@innssi.com or call us at (937) 630-3012